Description

This kit contains all the stock, tools, fixtures and code you’ll need to mill an aluminum clamp fixture on your Coast Runner CR-1!

Once complete, you can use the clamp as fixturing for future projects, and you can also reuse the tools! This is a great first project for your CR-1.

Contents include:

• 1x USB flash drive containing clamp cutcode and related 3D files
• 1x A250 edge finder
• 1x ¼” 3-flute 2.5” OAL endmill
• 1x ⅛” 3-flute 2” OAL ½” LOC endmill
• 1x ¼” spot drill
• 1x ¼” drill, 3” OAL
• 1x #19 (.162″) drill, 2 1/8″ OAL
• 1x ¼” ball bearing
• 1x ¼” ER-11
• 1x ⅛” ER-11
• 1x 4mm ER-11
• 1x M5x0.8 cut tap
• 1x T-handle
• 1x sets of clamp hardware
  • 1x M4x90mm mounting bolt
  • 1x M4x20mm mounting bolt
  • 1x M5x5mm probe bolt
  • 2x Insulating pads
  • 2x T-slot nut (for clamp)
  • 2x Polycarbonate rail insert
  • 2x M4 plastic washer
  • 2x M4 metal washers
• 1x Printed squaring stop
• 2x M4x25mm squaring stop bolt
• 2x 3” C-clamps
• 2x 0.75” x 2.5” x 3.25” aluminum stock

Aluminum Clamp Starter Kits Ship Q4 of 2024